Friday, November 27, 2020

Make More Alternative Cards using the Stamps from November 2020 Paper Pumpkin Jolly Gingerbread Kit

 For today’s tutorial I would like to share with you may last Paper Pumpkin Alternative Project using the November 2020 Paper Pumpkin Kit – Jolly Gingerbread. Every month my Paper Pumpkin subscribers receive an exclusive card kit designed by me using the stamp set from that month’s Paper Pumpkin Kit. This is the card they will be creating as an extra thank you for being my Paper Pumpkin Customer. If you would like to also receive this special perk, sign up today and select me as your demonstrator (Chelsey Christensen, CO) click here: https://www.paperpumpkin.com/en-us/sign-up/?demoid=2042902.

I love creating alternative cards with Paper Pumpkin Kits so make sure to come back for more videos as I continue to create with this month’s kit. I would love to see your finished creations that are inspired by this tutorial! You can tag me in any social media post using @creativechelsey | #creativechelsey or email me at chelsey@creativechelsey.com 

It is Paper Pumpkin Week here on Creative Chelsey. This is the last tutorial this week. If you missed some check out the playlist here: https://www.youtube.com/playlist?list=PL40dV1oxpkNmManAdayDiDsgDXqECCAkT

 

Watch me UNBOX this month’s Paper Pumpkin Kit here: https://youtu.be/Ci_IVKKOXck

Follow me on Instagram https://www.instagram.com/creativechelsey/

Or join my Facebook group https://www.facebook.com/groups/2221750878097906

Don't miss out on next months Paper Pumpkin Kit - subscribe today!
SUBSCRIBE to Paper Pumpkin - click here –
https://www.paperpumpkin.com/en-us/sign-up/?demoid=2042902

To purchase any of the products you need to create this project visit https://www.stampinup.com?demoid=2042902

Here are the dimensions and pieces you will need to create these cards:

Thick Whisper White Cardstock card base 5 ½” x 8 ½” scored at 4 ¼”

Blushing Bride Cardstock 3 ¼” x 4 ¾”

Whisper White Cardstock ½” x 3” & scrap for stamping

Mint Macaron Cardstock 1 ½” x 4”

Cinnamon Cider Cardstock oval shape 3 ½” x 2 ½”



Here is a list of the supplies I used to make the cards:

Thick Whisper White Cardstock 140272 $8.25

Blushing Bride Cardstock 131198 $8.75

Whisper White Cardstock 100730 $9.75

Cinnamon Cider Cardstock 153078 $8.75

Mint Macaron Cardstock 138337 $8.75

Cinnamon Cider Ink Pad 153114 $7.50

Blushing Bride Ink Pad 147100 $7.50

Mint Macaron Ink Pad 147106 $7.50

Cinnamon Cider Ribbon 152482 $6.00

Pearl Basic Jewels 144219 $5.00

Blender Pens 102845 $12.00

Banner Pick-a-Punch 153608 $23.00

Tin Tile 3D Embossing Folder 151801 $10.00

Stitched Shapes Dies 152323 $30.00

Paper Trimmer 152392 $25.00

Simply Shammy 147042 $8.00

Stampin’ Seal Adhesive 152813 $8.00

Multipurpose Liquid Glue 110755 $4.00

Tear & Tape Adhesive 138995 $7.00

Dimensionals 104430 $4.00

Clear Block D 118485 $8.50

Paper Snips 103579 $10.00

Bone Folder 102300 $7.00

Stampin' Pierce Mat 126199 $5.00

Take Your Pick Tool 144107 $10.00

Stampin’ Cut & Emboss Machine 149653 $120.00


1- Stamp and color the Gingerbread House from the stamp set included in the Paper Pumpkin Kit. Watch the technique video below for details. Fussy cut.

2- Emboss the Mint Macaron cardstock with the Tin Tile 3D Embossing Folder. Cut out the largest oval from the Stitched Shapes Dies in Cinnamon Cider.


3- Stamp the medium scroll image in Blushing Bride in the corners of the Blushing Bride cardstock. Watch the video below to see how to line up the stamp with the cardstock.


4- Adhere the Blushing Bride cardstock to the center of the cardbase. Add the Mint Macaron with liquid glue in the center.


5- Add the Cinnamon Cider oval to the center with dimensionals and then place the Colored Gingerbread with dimensionals so the bottom of the house lines up with the bottom of the Mint Macaron cardstock. Stamp the greeting on the ½” strip in Blushing Bride ink. Punch out the ends to create a banner. Add the greeting with dimensionals below the house.


6- Tie a bow with 10” of Cinnamon Cider Ribbon and add either three Pearls or three shapes from the kit.

All Done!

 




I have also created a video walking you through each step:

And here is my video showing you the Blender Pen Technqiue:

To purchase any of the products you see in this video visit

https://www.stampinup.com?demoid=2042902

 

Have a creative day!

Chelsey

chelsey@creativechelsey.com

Thursday, November 26, 2020

Paper Pumpkin Monthly Crafting Kit - November 2020 Jolly Gingerbread Alternative Handmade Card Ideas

Welcome to Paper Pumpkin Week here at Creative Chelsey. I love getting my Paper Pumpkin Kit every month and creating fun alternative projects using the supplies in the kit. Today is my third alternative project using the November 2020 Paper Pumpkin Kit – Jolly Gingerbread. For today’s card I wanted to keep with the Gingerbread House feeling by using a Cinnamon Cider Cardbase and the cute Candy Dots. There are two versions of the card, one with a Gingerbread House Gift Card and the other using the Gingerbread House Stamp. 


I love creating alternative cards with Paper Pumpkin Kits so make sure to come back for more videos as I continue to create with this month’s kit. I would love to see your finished creations that are inspired by this tutorial! You can tag me in any social media post using @creativechelsey | #creativechelsey or email me at chelsey@creativechelsey.com 


It is Paper Pumpkin Week here on Creative Chelsey. This is the third tutorial this week. If you missed some check out the playlist here: https://www.youtube.com/playlist?list=PL40dV1oxpkNmManAdayDiDsgDXqECCAkT

 

Watch me UNBOX this month’s Paper Pumpkin Kit here: https://youtu.be/Ci_IVKKOXck 

Follow me on Instagram https://www.instagram.com/creativechelsey/

Or join my Facebook group https://www.facebook.com/groups/2221750878097906

Don't miss out on next months Paper Pumpkin Kit - subscribe today!
SUBSCRIBE to Paper Pumpkin - click here –
https://www.paperpumpkin.com/en-us/sign-up/?demoid=2042902

 To purchase any of the products you need to create this project visit https://www.stampinup.com?demoid=2042902

Here are the dimensions and pieces you will need to create these cards:

From the Kit:

1- Gingerbread House

1- Decorated Front of House

1- Greeting Label

1- Envelope

Candy Dots

 

Extra Cardstock:

2- Cinnamon Cider Cardstock card base 5 ½” x 8 ½” scored at 4 ¼”

2- Blushing Bride Cardstock 2 ½” x 5 ½”

Whisper White Cardstock scrap for stamping

Mint Macaron Cardstock ¾” x 3”



Here is a list of the supplies I used to make the cards:

Blushing Bride Cardstock 131198 $8.75

Whisper White Cardstock 100730 $9.75

Cinnamon Cider Cardstock 153078 $8.75

Mint Macaron Cardstock 138337 $8.75

Cinnamon Cider Ink Pad 153114 $7.50

Blushing Bride Ink Pad 147100 $7.50

Calypso Coral Ink Pad 147101 $7.50

Mint Macaron Ink Pad 147106 $7.50

Shaded Spruce Ink Pad 147088 $7.50

Blender Pens 102845 $12.00

Banner Pick-a-Punch 153608 $23.00

Paper Trimmer 152392 $25.00

Simply Shammy 147042 $8.00

Stampin’ Seal Adhesive 152813 $8.00

Multipurpose Liquid Glue 110755 $4.00

Tear & Tape Adhesive 138995 $7.00

Dimensionals 104430 $4.00

Clear Block D 118485 $8.50

Paper Snips 103579 $10.00

Bone Folder 102300 $7.00

Stampin' Pierce Mat 126199 $5.00

Take Your Pick Tool 144107 $10.00

Stampin’ Cut & Emboss Machine 149653 $120.00


1- Card #1 Stamp the scroll designs on the front and back house die cuts in Blushing Bride ink. Remove a door from a gingerbread house and add it behind the open doorway with dimensionals. Trim any brown cardstock that may still be showing past the white house die-cut.


Card #2 Stamp and color a Gingerbread house using a blender pen and coordinating colors, see supply list above and the below technique video for details. Then fussy cut.


2- Add the Gingerbread houses to the center of the Blushing Bride Cardstock with dimensionals. Stamp the medium sized scroll at the top and bottom of the Gingerbread Houses.


3- Cut open an Envelope and cut 4 – ½” x 4 ¼” strips. Add these strips to the center of each side of the Blushing Bridge cardstock so about ¼” is showing. Now add this element to the right side of each cardbase.

4- Attach the greeting to the left of the Gingerbread Houses with dimensionals. Add three Candy Dots. Card #1 Add one to the top of the Gingerbread House with a dimensional in the opening.

All Done!



 

 




I have also created a video walking you through each step:

And here is my video showing you the Blender Pen Technqiue:

To purchase any of the products you see in this video visit

https://www.stampinup.com?demoid=2042902

 

Have a creative day!

Chelsey

chelsey@creativechelsey.com

Wednesday, November 25, 2020

Paper Pumpkin Alternative Card Idea with the November 2020 Kit - Jolly Gingerbread from Stampin Up

Welcome to Paper Pumpkin Week here at Creative Chelsey. I love getting my Paper Pumpkin Kit every month and creating fun alternative projects using the supplies in the kit. Today is my second alternative project using the November 2020 Paper Pumpkin Kit – Jolly Gingerbread. When I design my alternative projects I try and keep the extra supplies to a minimum so paper crafters of all levels can enjoy making these cards. Today’s card are simple yet stunning with the color combination of Mint Macaron and Shaded Spruce. 


I love creating alternative cards with Paper Pumpkin Kits so make sure to come back for more tutorials as I continue to create with this month’s kit. I would love to see your finished creations that are inspired by this tutorial! You can tag me in any social media post using @creativechelsey | #creativechelsey or email me at chelsey@creativechelsey.com 

It is Paper Pumpkin Week here on Creative Chelsey. This is the second tutorial this week. If you missed some check out the playlist here: https://www.youtube.com/playlist?list=PL40dV1oxpkNmManAdayDiDsgDXqECCAkT

 

Watch me UNBOX this month’s Paper Pumpkin Kit here: https://youtu.be/Ci_IVKKOXck

Follow me on Instagram https://www.instagram.com/creativechelsey/

Or join my Facebook group https://www.facebook.com/groups/2221750878097906

 


To purchase any of the products you need to create this project visit https://www.stampinup.com?demoid=2042902

 
Don't miss out on next months Paper Pumpkin Kit - subscribe today!
SUBSCRIBE to Paper Pumpkin - click here –
https://www.paperpumpkin.com/en-us/sign-up/?demoid=2042902
 

Here are the dimensions and pieces you will need to create these cards:

From the Kit:

1- Gingerbread House

1- Decorated Front of House

1- Greeting Label

 

Extra Cardstock:

2- Mint Macaron Cardstock card base 5 ½” x 8 ½” scored at 4 ¼”

2- Shaded Spruce Cardstock 3 ¼” x 4 ½”

Whisper White Cardstock ½” x 3” greeting | scrap paper for Gingerbread house

Daffodil Delight Cardstock scrap



Here is a list of the supplies I used to make the cards:

Mint Macaron Cardstock 138337 $8.75

Shaded Spruce Cardstock 146981 $8.75

Whisper White Cardstock 100730 $9.75

Daffodil Delight Cardstock 119683 $8.75

Blushing Bride Ink Pad 147100 $7.50

Calypso Coral Ink Pad 147101 $7.50

Mint Macaron Ink Pad 147106 $7.50

Shaded Spruce Ink Pad 147088 $7.50

Daffodil Delight Ink Pad 147094 $7.50

Cinnamon Cider Ink Pad 153114 $7.50

Shimmery Crystal Effects 150892 $5.00

Blender Pens 102845 $12.00

Whisper White Crinkled Seam Binding Ribbon 151326 $7.50

Banner Pick-a-Punch 153608 $23.00

Paper Trimmer 152392 $25.00

Simply Shammy 147042 $8.00

Stampin’ Seal Adhesive 152813 $8.00

Multipurpose Liquid Glue 110755 $4.00

Tear & Tape Adhesive 138995 $7.00

Dimensionals 104430 $4.00

Clear Block D 118485 $8.50

Paper Snips 103579 $10.00

Bone Folder 102300 $7.00

Stampin' Pierce Mat 126199 $5.00

Take Your Pick Tool 144107 $10.00

Stampin’ Cut & Emboss Machine 149653 $120.00

 


1- Stamp the scroll designs on the front house die cuts in Blushing Bride ink.


2- Attach some Daffodil Delight cardstock to the back of the star cut out at the top. Add the Shimmery Crystal Effects to the top inside the star shape. Set aside to dry.


3- Stamp the medium scroll image along the edge of the Shaded Spruce cardstock, I used the Blushing Bride Ink from the kit. Start on the 3 ¼” side and stamp in the middle. The long edge of the image should be along the edge of the cardstock. Turn the cardstock and stamp at a 90 degree angle to the first image. The stamp will sit just a little lower than the cardstock. Repeat on the other side. Then follow the same steps for the top of the cardstock. To fill in the small gap left on the 4 ½” side use one of the small scroll designs. Repeat on other Shaded Spruce cardbase.


4- For card #1, warp 16” of Whisper White ribbon around the Shaded Spruce cardstock and tie a bow on the right side. Then adhere it to the center of the cardbase.

For card #2 adhere the Shaded Spruce cardstock to the cardbase with no ribbon.


5- Trim off the flap of one gingerbread card, then cut the two houses in half. Add one to each cardbase in the center of the Shaded Spruce cardstock. For card #1 Add the front house die cut to the gingerbread house with dimensionals.


For card #2- Stamp and color a Gingerbread house using a blender pen and coordinating colors, see supply list above and below technique video for details. Then fussy cut and add to the center of the gingerbread die-cut with dimensionals.


6- Stamp the greeting on the label or Whisper White ½” strip. Punch ends of strip with the Banner Pick-a-Punch to give it a banner look. Attach the greetings to the cards with dimensionals.


For card #2- tie a bow with 10” of ribbon and adhere it to the top of the gingerbread die-cut with a glue dot.

All Done!

 

 



I have also created a video walking you through each step:


And here is my video showing you the Blender Pen Technqiue:

To purchase any of the products you see in this video visit

https://www.stampinup.com?demoid=2042902

 

Have a creative day!

Chelsey

chelsey@creativechelsey.com

Tuesday, November 24, 2020

Stampin Up Paper Pumpkin Kit Alternative Handmade Card Idea - November 2020 Jolly Gingerbread

Welcome to Paper Pumpkin Week here at Creative Chelsey. I love getting my Paper Pumpkin Kit every month and creating fun alternative projects using the supplies in the kit. Today is my first alternative project using the November 2020 Paper Pumpkin Kit – Jolly Gingerbread. This kit comes with everything you need to make 15 cute gift card holders. However, I have taken these and with just a couple extra supplies from my craft room, I have turned them into handmade holiday cards. 

I love creating alternative cards with Paper Pumpkin Kits so make sure to come back for more videos as I continue to create with this month’s kit. I would love to see your finished creations that are inspired by this tutorial! You can tag me in any social media post using @creativechelsey | #creativechelsey or email me at chelsey@creativechelsey.com

 



It is Paper Pumpkin Week here on Creative Chelsey. This is the first tutorial this week. If you missed some check out the playlist here: https://www.youtube.com/playlist?list=PL40dV1oxpkNmManAdayDiDsgDXqECCAkT

 Watch me UNBOX this month’s Paper Pumpkin Kit here: https://youtu.be/Ci_IVKKOXck

 



Follow me on Instagram https://www.instagram.com/creativechelsey/

Or join my Facebook group https://www.facebook.com/groups/2221750878097906

 To purchase any of the products you need to create this project visit https://www.stampinup.com?demoid=2042902

Don't miss out on next months Paper Pumpkin Kit - subscribe today!
SUBSCRIBE to Paper Pumpkin - click here –
https://www.paperpumpkin.com/en-us/sign-up/?demoid=2042902

Here are the dimensions and pieces you will need to create these cards:

From the Kit:

1- Gingerbread House

1- Decorated Front of House

1- Blank Back of House

1- Greeting Label

1- Punched out Door

 

Extra Cardstock:

2- Blushing Bride Cardstock card base 5 ½” x 8 ½” scored at 4 ¼”

Whisper White Cardstock ½” x 3”



Here is a list of the supplies I used to make the cards:

Blushing Bride Cardstock 131198 $8.75

Whisper White Cardstock 100730 $9.75

Blushing Bride Ink Pad 147100 $7.50

Calypso Coral Ink Pad 147101 $7.50

Mint Macaron Ink Pad 147106 $7.50

Shaded Spruce Ink Pad 147088 $7.50

Daffodil Delight Ink Pad 147094 $7.50

Blender Pens 102845 $12.00

Stampin Chalk Marker 132133 $3.50

Whisper White Crinkled Seam Binding Ribbon 151326 $7.50

Sponge Daubers 133773 $5.00

Banner Pick-a-Punch 153608 $23.00

Paper Trimmer 152392 $25.00

Simply Shammy 147042 $8.00

Stampin’ Seal Adhesive 152813 $8.00

Multipurpose Liquid Glue 110755 $4.00

Tear & Tape Adhesive 138995 $7.00

Dimensionals 104430 $4.00

Clear Block D 118485 $8.50

Paper Snips 103579 $10.00

Bone Folder 102300 $7.00

Stampin' Pierce Mat 126199 $5.00

Take Your Pick Tool 144107 $10.00

Stampin’ Cut & Emboss Machine 149653 $120.00

 


1- Stamp the scroll designs on the front and back house die cuts in Blushing Bride ink.


2- Stamp the greeting on the label or Whisper White ½” strip. Punch ends of strip with the Banner Pick-a-Punch to give it a banner look.


3- Stamp the larger scroll image 1” from the bottom of the cardbase so it almost touches the right edge of the card. Flip and repeat on the other side to create a mirror image. Repeat on other cardbase.


4- Trim off the flap of one gingerbread card, then cut the two houses in half. Add one to each cardbase in the center of the stamped scroll image.


5- Add some color to the little door punch out with a Sponge Dauber, I used Shaded Spruce. Add this to the back house die. If you want use a Blender Pen or markers to add little dots around the door in the coordinating colors. I then added a little chalk marker on the left of each circle to give it a 3D look.


6- Add the front & back house die cuts to the gingerbread houses with dimensionals.


7- Use one of the small scroll images and stamp it coming out of the chimney of the gingerbread house.


8- If you want ribbon, tie a bow with 10” of ribbon and add it to the back of the greeting before adding the greeting to the left of gingerbread house with dimensionals. If you want to add the candy dots from the kit, randomly place three around your card.

All Done!

 

 


I have also created a video walking you through each step:

To purchase any of the products you see in this video visit

https://www.stampinup.com?demoid=2042902

 

Have a creative day!

 Chelsey

chelsey@creativechelsey.com

Monday, November 23, 2020

November 2020 Paper Pumpkin Kit Unboxing & Giveaway - Plus make this cute treat box alternative

Today I shared the November 2020 Paper Pumpkin Kit LIVE on my YouTube channel. We made the original projects, these cute gift card holders and then a quick and cute treat box alternative. I am not including a tutorial for this project as it is quite easy to put together, but the video is below if you would like to check it out.

Here is the measurments for the bottom of the treat box:

Cinnamon Cider Cardstock 3 3/8" x 3 3/8" scored at 1/2" on all sides. Cut at the score line on the top and bottom of the square. Fold into a shallow open top box and attach two gingerbread houses cards with tear and tape adhesive. Then decorate as you wish.

Here are the links I also shared in my video:

Enrty Form for 1-month Paper Pumpkin Subscription Giveaway https://creativechelsey.blogspot.com/p/entry-form.html Sign up to get your own Paper Pumpkin Kit https://www.paperpumpkin.com/en-us/sign-up/?demoid=2042902 Here are some of the tool I used to make this project: Take Your Pick - Pick Up Tool (https://www.stampinup.com/products/take-your-pick?demoid=2042902) Stampin' Seal Adhesive (https://www.stampinup.com/products/stampin-seal?demoid=2042902) Clear Block D (https://www.stampinup.com/products/clear-block-d?demoid=2042902) Bone Folder (https://www.stampinup.com/products/bone-folder?demoid=2042902) Simply Shammy - Stamp Cleaner (https://www.stampinup.com/products/simply-shammy?demoid=2042902)

Here is the unboxing video:
Have a creative day, Chelsey chelsey@creativechelsey.com

Thursday, November 19, 2020

A Beautiful ANNIVERSARY Handmade Card with EASY COLORING TECHNIQUE | Forever Ferns Stamp Set - Stampin' Up!

 Sometimes I limit the products I use when making cards, while other times I let the creative juices flow and use any Stampin’ Up products I have. That is what I did for this card. I knew I wanted to use the products from my November 2020 Customer Appreciation Program (check them out here) to make this card, but then added a lot more (see the list of products below). I love the monochrome feeling and how the fun Coloring Technique created beautiful leaves for this card.

I hope you enjoy this handmade card tutorial and come back for more. I would love to see your finished creations that are inspired by this tutorial! You can tag me in any social media post using @creativechelsey | #creativechelsey or email me at chelsey@creativechelsey.com 

Follow me on Instagram https://www.instagram.com/creativechelsey/ 

Or join my Facebook group https://www.facebook.com/groups/2221750878097906 


To purchase any of the products you need to create this project visit https://www.stampinup.com?demoid=2042902


Here are the dimensions and pieces you will need to create this card:

Thick Whisper White Cardbase – 5 ½” x 8 ½” scored at 4 ¼”

In Good Taste Designer Series Paper (concrete pattern) – 4 1/8” x 5 3/8”

Plush Poinsettia Specialty Paper – 3 ¼” x 4 ½”

Whisper White Cardstock – scraps for stamping & die cuts

Rich Razzleberry – scraps for die cuts

Gray Granite Ribbon – 14”



Here is a list of the supplies I used to make the card 

Forever Fern Bundle 154094 $54.00 (save 10%)

     Includes: Forever Fern Stamp Set 152559 $24.00 & Forever Flourishing Dies 152714 $36.00

Many Mates Stamp Set 152633 $23.00

Thick Whisper White Cardstock 140272 $8.25

Whisper White Cardstock 100730 $9.75

Rich Razzleberry Cardstock 115316 $8.75

Gray Granite Ink Pad 147118 $7.50

Rich Razzleberry Ink Pad 147091 $7.50

Memento Black Ink 132708 $6.00

In Good Taste Designer Series Paper 152494 $21.00

Plush Poinsettia Specialty Paper 153486 $11.00

Well Written Dies 151816 $40.00

Beautiful Boughs Dies 150661 $35.00

Gray Granite Shimmer Ribbon 152463 $7.00

Rhinestone Basic Jewels 144220 $5.00

Sponge Daubers 133773 $5.00

Stampin’ Cut & Emboss Machine 149653 $120.00

Paper Trimmer 152392 $25.00 

Clear Block D 118485 $8.50

Clear Block C 118486 $7.00

Simply Shammy 147042 $8.00 

Stampin’ Seal Adhesive 152813 $8.00

Multipurpose Liquid Glue 110755 $4.00 

Tear & Tape Adhesive 138995 $7.00 

Glue Dots 103683 $5.25

Mini Dimensionals 144108 $4.00 

Paper Snips 103579 $10.00 

Bone Folder 102300 $7.00 

Take Your Pick Tool 144107 $10.00 



1- Stamp your choice of leaf from the Forever Fern Stamp Set. Start by inking the whole image with Gray Granite, then add just a little Rich Razzleberry ink to the edges with a sponge dauber. Repeat so you have 3 leaves. Cut out with coordinating dies.


2- Stamp your greeting from Many Mates Stamp Set in Memento Black ink. Use the small label from the Beautiful Boughs Dies and cut out.

3- Cut out from Whisper White cardstock the leaf swag die shape from the Forever Flourishing Dies. Repeat so you have two.


4- Add the In Good Taste Designer Series Paper to the front of the cardbase. Add the Plush Poinsettia Vellum in the center with glue dots under the pattern.


5- Add the three leaves to the card. One in the upper right hand corner, and two pointing down.


6- Adhere the leaf swags under the leaves so the leaves come up on each side of the stamped images.


7- On the back of the greeting add 14” of Gray Granite Ribbon in a faux bow. Add this to the center of the leaves with dimensionals.


8- Cut out six little flowers from the Well Written dies in Rich Razzleberry. Layer two on top of each other with a glue dot. Add these around the greeting. Place a small rhinestone in the center to cover up the hole.

All Done!




Here is the same project as a video tutorial.

To purchase any of the products you see in this video visit https://www.stampinup.com?demoid=2042902


Have a creative day,

Chelsey

chelsey@creativechelsey.com