I loved playing with all the elements the Paper Pumpkin Kit from November 2019. One thing I want to make sure I do is only use only the stamp set to create a beautiful handmade card. It is Paper Pumpkin Week here on CreativeChelsey. This is the fifth and last video this week. Make sure to look at previous posts for more.
I also send a free exclusive card kit designed by me to all my Paper Pumpkin customers who received the November 2019 Paper Pumpkin Kit. This is the card they will be making from their kit. I include all cardstock and accessories needed to make the card, twice (adhesive is not included). Interested in getting your own free exclusive kit for next month? Sign up for Paper Pumpkin at this link - https://www.paperpumpkin.com/en-us/sign-up/?demoid=2042902
Here are the dimensions and pieces you will need to create these cards:
Cherry Cobbler Cardstock card base 5.5" x 8.5" scored at 4.25" | Large Scrap Paper for Punching 2" x 5.5"
Mossy Meadow Cardstock 0.75" x 3.5"
Verry Vanilla Cardstock 3.5" x 4.75" | 7/8" x 2.75"
Vellum Cardstock 4.5" x 3.25"
Linen Thread 18"
Here is a list of the supplies I used to make the cards:
Cherry Cobbler Cardstock 119685 $8.75
Mossy Meadow Cardstock 133676 $8.75
Cherry Cobbler Ink Pad 147083 $7.50
Mossy Meadow Ink Pad 147111 $7.50
Verry Vanilla Cardstock 101650 $9.75
Vellum Cardstock 101856 $10.00
Linen Thread 104199 $5.00
Small Circle Punch
Paper Trimmer 152392 $25.00
Simply Shammy 147042 $8.00
Snail Adhesive 104332 $7.00
Multipurpose Liquid Glue 110755 $4.00
Dimensionals 104430 $4.00
Clear Block D 118485 $8.50
Paper Snips 103579 $10.00
Bone Folder 102300 $7.00
Stampin' Pierce Mat 126199 $5.00
Take Your Pick Tool 144107 $10.00
1- Begin by stamping the holly stamp in Mossy Meadow randomly on the Very Vanilla Cardstock.
2- With the Cherry Cobbler scrap paper punch with a small circle punch enough circles to cover all the berries you stamped. Trim any berries that may be over the edge.
3- Adhere all the small circles over the berries on the Very Vanilla Cardstock
4- Adhere the Very Vanilla Cardstock at an angle in the center of the Cherry Cobbler card base.
5- Adhere with a small glue dot in each corner the sheet of vellum at an angle over the Very Vanilla Cardstock. You can also add any adhesive behind the greeting element if you would like.
6- Adhere the Mossy Meadow strip to the bottom right corner.
7- Stamp on the Very Vanilla strip - Peace in Mossy Meadow and Love & Joy in Cherry Cobbler.
8- Adhere some wrapped Linen Thread to the back of the greeting and add above the Mossy Meadow strip with dimensionals.
I loved making these cute Christmas Cardinal Handmade Cards using elements from the November 2019 Paper Pumpkin Kit from Stampin' Up. I was inspired by one of the alternative projects suggested in the kit and made my own version. Then created my own card using some of the same elements. I love creating alternative cards with Paper Pumpkin Kits so make sure to come back for more videos as I continue to create with this months kit.
It is Paper Pumpkin Week here on CreativeChelsey. This is the fourth tutorial this week. Make sure to keep coming back for more.
Here are the dimensions and pieces you will need to create these cards:
Card #1- Single Cardinal
Pool Party Cardstock card base 5.5" x 8.5" scored at 4.25"
Scrap of Whisper White Cardstock
From the Kit:
Snowflake Tag
1 Red Cardinal
2 Sprigs
1 Large Banner
20" Silver Twine
3 Small Snowflakes
Sequins
Card #2- Two Cardinals
Early Espresso Cardstock card bases 5.5" x 8.5" scored at 4.25" | 0.5" x 4"
Envelope from the Oct. Kit - or Crumb Cake Cardstock 3.5" x 5.25"
From the Kit:
White small banner
Pool Party gradient rectangle
2 Cardinals
20" Green Ribbon
20" Silver Twine
6 Sprigs
Sequins
Here is a list of the supplies I used to make the cards:
Pool Party Cardstock 122924 $8.75
Pool Party Ink Pad 147107 $7.50
Early Espresso Cardstock 119686 $8.75
Crumb Cake Cardstock 120953 $8.75 or an envelope from Oct. 2019 Paper Pumpkin Kit
Sponge Daubers 133773 $5.00
Real Red Ink 147084 $7.50
Whisper White Cardstock 101650 $9.75
Paper Trimmer 152392 $25.00
Simply Shammy 147042 $8.00
Snail Adhesive 104332 $7.00
Multipurpose Liquid Glue 110755 $4.00
Dimensionals 104430 $4.00
Clear Block D 118485 $8.50
Paper Snips 103579 $10.00
Bone Folder 102300 $7.00
Stampin' Pierce Mat 126199 $5.00
Take Your Pick Tool 144107 $10.00
Card #1- Single Cardinal
1- On the Pool Party card base with Pool Party ink, stamp the snowflake stamp randomly around the front of the card.
2- On the snowflake tag, adhere some scrap paper on the back over the punched hole so the circle doesn't come out. Then adhere the snowflake tag with dimensionals to the bottom right corner of the card with about 0.5" space on the right and left.
3- Adhere the cardinal to the snowflake tag on the upper left.
4- Add 2 sprigs at the base of the cardinal - see image
5- On the large white banner stamp Peace in Shaded Spruce at the top.
6- On a scrap piece of Whisper White cardstock stamp the Love & Joy in Real Red.
7- Cut out the Love and Joy and adhere it below the Peace on the white banner.
8- Wrap 20" of silver twine to the back of the greeting.
9- With dimensionals adhere the greeting below the bird and centered on the tag.
10- Add 3 small snowflakes and sequins to the card.
All done!
Card #2- Two Cardinal
1- From October 2019 Paper Pumpkin Kit I used the wood grain paper from the inside of the envelopes. If you don't have one try it with Crumb Cake Cardstock.
2- To make the second Cardinal in reverse - Flip the Cardinal so the white side is up and use a sponge dauber and Real Red ink and daub the ink all over. You will need to do multiple layers to get a deep even red all over. Let dry - try not to touch it as the ink will transfer easy until it is completely dry.
3- Stamp the Love & Joy in Shaded Spruce on a small white banner from the kit
4- Stamp the snowflakes randomly on the Pool Party Gradient rectangle in Pool Party ink.
5- Trim the envelope down to 5.25" x 3.5"
6- Adhere the wood grain paper to the center of the Early Espresso card base.
7- Add 20" of Green Ribbon and 20" of silver twine to the back of the Pool Party rectangle. Make a "z" shape by going back and forth. Trim any excess.
8- Add the Pool Party rectangle to the center of the card with dimensionals.
9- Adhere the first Cardinal on the left of the card, place it so the head of the bird is near the top of the Pool Party rectangle. Make sure the tail doesn't extend beyond the edge of the card.
10- Add the second Cardinal to the right side of the card. Tilt it's body so the head of the bird is below the first birds. Again make sure the tail doesn't go past the edge of the card.
11- Add 4 Springs to the back of the 0.5" strip of Early Espresso cardstock. Bottom left and Top right sides. Adhere it to the bottom of the Pool Party rectangle
12- Add the last 2 sprigs to the right side of the greeting. Add to the card with dimensionals on the left of the strip and under the first bird.
These alternative cards made with the November 2019 Paper Pumpkin Kit from Stampin Up really showcase some of the beautiful pieces in this kit. I love creating alternative cards with Paper Pumpkin Kits so make sure to come back for more videos as I continue to create with this months kit.
It is Paper Pumpkin Week here on CreativeChelsey. This is the third video this week. Make sure to keep coming back for more.
Don't miss out on next months Paper Pumpkin Kit - subscribe today!
Here are the dimensions and pieces you will need to create these cards:
Card #1 - Pine Tree and Deer
Garden Green Cardstock card base 5.5" x 8.5" scored at 4.25"
Garden Green Ink Pad
Whisper White Cardstock - scrap
20" Linen Thread
From the Kit:
Small white banner
Pool Party gradient large rectangle
Pine Tree
Silver Deer
Real Red thin strip
Sequins
Card #2 - Two Pine Trees
Pool Party Cardstock card base 5.5" x 8.5" scored at 4.25"
Garden Green Cardstock 2" x 5.5"
Pool Party Ink Pad
20" Linen Thread
Silver Foil Cardstock 0.25" x 3"
From the Kit:
Snowy Tag
1 Pine Tree
White Strip
Real Red strip - cut from another project
Small Snowflakes
Sequins
Here is a list of the supplies I used to make the cards:
Garden Green Cardstock 102584 $8.75
Garden Green Ink Pad 147089 $7.50
Pool Party Cardstock 122924 $8.75
Pool Party Ink Pad 147107 $7.50
Silver Foil Sheets 132178 $5.00
Whisper White Cardstock 101650 $9.75
Linen Thread 104199 $5.00
Paper Trimmer 152392 $25.00
Triple Banner Punch 138292 $23.00
Simply Shammy 147042 $8.00
Snail Adhesive 104332 $7.00
Multipurpose Liquid Glue 110755 $4.00
Dimensionals 104430 $4.00
Clear Block D 118485 $8.50
Paper Snips 103579 $10.00
Bone Folder 102300 $7.00
Stampin' Pierce Mat 126199 $5.00
Take Your Pick Tool 144107 $10.00
Card #1 - Pine Tree & Deer
1- Begin by stamping the Holly Leaves & Berry stamp in Garden Green Ink on the Garden Green cardbase. Stamp randomly around the border.
2- On a scrap piece of Whisper White cardstock stamp the Holly leaves again in Garden Green
3- On the small white banner from the kit stamp the greeting "Let it snow" in Garden Green
4- Using dimensionals add the Pool Party gradient large rectangle piece from the kit to the center of the cardbase. Make sure the darker side is at the top.
5- Cut off the ring from the Pine Tree tag and then adhere it to the left side of the Pool Party gradient piece.
6- Add the Silver Deer with dimensionals to the right of the tree. You want the feet are near the bottom and the neck is slightly coming off the edge of the Pool Party gradient piece.
7- Center the greeting on the thin Real Red strip from the kit. Then add the Linen Thread wrapped on the back of the greeting.
8- Fussy cut the stamped Holly Leaves. Don't worry about the berries,
9- Add the leaves to the top right corner of the greeting.
10- Add the greeting element over the Deer's legs with dimensionals. Make sure you can still see it's feet.
11- Add some sequins.
Card #2 - Two Pine Trees
1- Add a scrap piece of cardstock with some adhesive to the back of the hole on the snowy tag so the circle doesn't come out.
2- Then trim the bottom corners so they are similar to the top.
3- Use the Triple Banner Punch and punch out the Garden Green 2" strip on one side.
4- Cut one Pine Tree into 2 trees. Remove the circle from the top. Measure 2" from the bottom of the tree this is where we will start reshaping the tree. Then measure above this line 0.5" this is where we want the top of the tree to stop. Take a pencil and roughly draw how you want to reshape the top of the tree.
5- Cut along your drawn line. Try not to remove any of the tree from the smaller top tree.
6- Adhere the smaller tree to the right of the snowy tag. There will be a hole in the bottom of this tree. We will be covering this area with the greeting.
7- Using dimensionals add the larger tree to the left of the tag.
8- Wrap 20" of Linen Thread to the flat side of the Garden Green 2" strip and tie a bow.
9- With Pool Party Ink stamp the small snowflakes randomly on the Pool Party cardbase.
10- Stamp the greeting "Let it snow" with Pool Party ink on the white strip from the kit. Adhere a thin strip of Silver paper behind the greeting.
